Frequently Asked Questions

Most residential fences in Frisco take 1-3 days to install, depending on length and material. A typical 200-foot wood privacy fence is a 2-day job. Trex and iron fences may take a day longer because of the installation method. We schedule start dates within 1-2 weeks of signing.

The City of Frisco does not currently require a permit for residential fences under 8 feet tall. However, your HOA almost certainly has its own approval process. We handle the HOA submission for you, including drawings and material specs.

We prepare the application packet with a site plan, fence specifications, and material samples if needed. Most Frisco HOAs respond within 2-4 weeks. Some have architectural review committees that meet monthly, so timing matters. We have been through this process with dozens of Frisco HOAs.

Our crew arrives in the morning, marks the fence line, and begins setting posts. Posts need to cure in concrete overnight before we attach rails and boards, which is why most jobs are at least two days. We clean up at the end of each work day and haul off all debris when the job is done.

We strongly recommend it if you are not sure where your property line sits. Building a fence even a few inches onto a neighbor's property can create legal problems down the road. If you do not have a recent survey, we can recommend a local surveyor. Many Frisco homeowners already have one from their closing documents.

Cedar and Trex composite handle the Texas climate best. Cedar naturally resists moisture and insects, and it weathers gracefully when maintained. Trex is completely impervious to moisture, heat, and UV. Iron is also a strong choice if rust prevention (powder coating) is done properly.

Cedar is a natural wood that ages over time and needs periodic staining. Vinyl is a plastic product that never needs staining but can crack in extreme cold and may yellow with UV exposure. In the Frisco market, cedar is more popular because it fits the look of most neighborhoods and HOA requirements.

Trex composite fencing is tested to 130 mph winds, making it the most wind-resistant residential option. Chain link lets wind pass through entirely, so it rarely blows down. Wood board-on-board fences handle wind better than solid panel fences because the overlapping boards allow some airflow.

It depends on the dog. Chain link is great for containment because dogs cannot chew or push through it. Solid wood privacy fences keep dogs from seeing and reacting to things outside the yard, which helps with barking. For diggers, adding a concrete footer or buried wire along the bottom of any fence is a good solution.

In the Frisco climate, every 2-3 years is the sweet spot. The Texas sun and summer heat break down stain faster than cooler climates. We recommend a semi-transparent oil-based stain that lets the wood breathe while blocking UV. Wait 3-6 months after installation before the first application.

Powder-coated iron fences need very little maintenance. Rinse them off with a garden hose a few times a year to remove dust and dirt. If you see any chips or scratches in the coating, touch them up with matching paint to prevent rust from starting. That is about it.

Check for leaning posts, broken boards, and downed sections. If the fence is across a sidewalk or in a dangerous position, move what you can safely. Take photos for your insurance company before making temporary fixes. Then give us a call and we will get someone out to assess the damage.

You can, but use a low-pressure setting (under 1,500 PSI) and a wide fan tip. High pressure will damage the wood grain and force water deep into the boards, which can cause warping. We recommend pressure washing only before re-staining, and letting the fence dry completely for a week before applying stain.

Make sure posts are set at least 30-36 inches deep in concrete. Keep soil graded away from the base of the posts so water does not pool. In Frisco's clay soil, seasonal expansion and contraction can shift posts, so deeper footings help. If a fence is already starting to lean, fixing it early prevents bigger problems.